Why a Generac Whole-Home Generator Is Important Before Winter in Atlanta.


Holiday lighting season in Metro Atlanta starts the minute the Thanksgiving dishes are done. Roof lines get outlined, trees get wrapped, and inflatables show up on front lawns from Kennesaw to Sandy Springs.

It is also the time of year when we get the same calls over and over: "My GFCI keeps tripping," "I need another outlet out front," and "Can I just put a regular outlet outside?"

The short answer: every outdoor outlet needs GFCI protection and a weatherproof bubble cover. A regular outlet can work outside, but only if a GFCI breaker protects the circuit, and it still needs that bubble cover. Below, the licensed electricians at Ampt Electric explain why, so your display stays bright and your family stays safe all season.


Why Does My GFCI Keep Tripping With Holiday Lights?

A GFCI (ground fault circuit interrupter) watches the current going out and coming back on a circuit. If even a tiny amount leaks somewhere it shouldn't, like through water or a person, it shuts off power in a fraction of a second. When your GFCI trips, it is usually doing its job.

The most common causes we see during the holidays:

  • Moisture in plugs and connections. Rain, dew, and morning frost seep into connections that sit on the ground or in gutters.
  • Damaged cords or light strands. Cracked insulation, chewed wires, or crushed cords leak current.
  • Indoor lights used outdoors. Lights not rated for outdoor use aren't built to keep water out.
  • Too many strands on one GFCI. Each strand leaks a small amount of current. Add enough of them together and the GFCI reads it as a fault.
  • An old or worn-out GFCI. GFCIs wear out over time and can start tripping for no clear reason, or stop protecting you at all.

If the lights go dark and the GFCI won't reset, or the breaker in your panel trips instead, you may be overloading the circuit. That is a sign you need more capacity, not a bigger extension cord.

Quick fixes to try first: unplug everything, reset the GFCI, then plug strands back in one at a time to find the problem. Keep connections off the ground, wrap them in a weatherproof connection box, and replace any strand with visible damage.


How Easy Is It to Add a New Outdoor Outlet for Holiday Lights?

For most homes, adding an outdoor outlet is a quick, routine job for a licensed electrician, often finished in a few hours. It is one of the best upgrades you can make if you're tired of running extension cords across the yard or through a cracked-open window.

How simple it is depends on a few things:

  • Where you want it. An outlet near an existing circuit or close to the panel is the easiest to add. Outlets at the far end of the yard, on a post, or by the driveway may need trenching.
  • Your exterior wall. Siding is usually straightforward. Brick, stone, and stucco, common across Metro Atlanta, take more care to cut cleanly.
  • How much power you need. A few strands can share a circuit. A large display with inflatables, projectors, and thousands of lights may need a dedicated circuit so you're not tripping breakers every night.
  • Timers and controls. We can add a switch inside, or a timer or smart control, so your lights turn on and off without a trip outside in the cold.

Every new outdoor outlet we install includes GFCI protection and a bubble cover, and meets the National Electrical Code (NEC) and local requirements. Book early: November and early December fill up fast.


Can I Install a Regular Outlet Outside?

Yes, but only if the circuit already has GFCI protection from a GFCI breaker in your electrical panel. Any outlet exposed to water or the weather must be GFCI protected. That protection can come from one of two places:

With a GFCI breaker, the whole circuit is already protected, so a regular outlet downstream is safe and up to code. Without one, a regular outlet outside is a shock hazard and a code violation.

One detail: "regular" outdoors should still mean a weather-resistant (WR) rated outlet. They look like standard outlets but are built to resist corrosion and moisture.

Not sure whether your outdoor outlets are protected? Look for Test/Reset buttons on the outlet, or a breaker in your panel with a Test button. If you can't find either, call an electrician before plugging in your display.


Why Every Outdoor Outlet Needs a Bubble Cover

A bubble cover (also called an in-use cover) is the deep, dome-shaped cover that closes over the outlet while something is plugged in. Every outdoor outlet needs one, whether it is a GFCI outlet or a regular outlet on a GFCI breaker.

The old flat flip-up covers only keep water out when nothing is plugged in. During the holidays, your lights stay plugged in for weeks, through rain, frost, and the occasional Georgia ice storm. A bubble cover keeps moisture off the plug and the outlet the whole time.

That matters for two reasons:

  • Safety. Water in an outlet is a shock and fire risk.
  • Fewer nuisance trips. Less moisture means fewer GFCI trips, so your lights stay on.

If your outdoor outlets still have flat covers, a bubble cover upgrade is quick and inexpensive, and it's one of the easiest ways to make holiday lighting safer.


Outdoor Holiday Lighting Safety Checklist

Before you hang the first strand this season, run through this list:

  1. Test every outdoor GFCI by pressing Test, then Reset. If it doesn't trip and reset, replace it.
  2. Confirm every outdoor outlet has a bubble cover.
  3. Use only lights and extension cords rated for outdoor use.
  4. Inspect strands and cords for cracks, frayed wires, and broken sockets. Throw out damaged ones.
  5. Keep plugs and connections off the ground and out of puddles and gutters.
  6. Don't daisy-chain more strands than the manufacturer allows.
  7. Never run cords through doors or windows, where they can be pinched.
  8. Use a timer so lights aren't running all night or while you're away.
  9. Switch to LED lights. They draw far less power and run cooler than incandescent bulbs.
  10. If breakers trip, outlets feel warm, or you see scorch marks, unplug and call an electrician.

Outdoor Outlet and Holiday Lighting FAQs

Do outdoor outlets have to be GFCI? Yes. Any outlet outdoors or exposed to water must have GFCI protection, either from a GFCI outlet or a GFCI breaker.

Can I use a regular outlet outside? Only if the circuit is protected by a GFCI breaker. The outlet should be weather-resistant rated and still needs a bubble cover.

What is a bubble cover on an outdoor outlet? A bubble cover, or in-use cover, is a weatherproof dome that stays closed while cords are plugged in, keeping rain and moisture out.

Why does my GFCI trip when it rains? Water is reaching a plug, connection, or damaged cord and leaking current. Lift connections off the ground, cover them, and check strands for damage.

Is it safe to reset a GFCI that keeps tripping? Reset it once. If it trips again, unplug everything and add items back one at a time. If it still trips, have an electrician check it.

How long does it take to add an outdoor outlet? Most outdoor outlet installs take a few hours, depending on distance from the panel, wall material, and whether a new circuit is needed.

Do I need a dedicated circuit for holiday lights? A small display usually doesn't. Large displays with inflatables and many strands often do, to avoid tripped breakers.



Call Ampt Electric for Outdoor Outlets and GFCI Repair in Metro Atlanta

A safe holiday display starts with safe outlets. Whether you need a new outdoor outlet, a GFCI that won't stop tripping fixed, bubble cover upgrades, or a dedicated circuit for a big display, Ampt Electric can help.

We serve homeowners across Metro Atlanta, including Kennesaw, Acworth, Marietta, Smyrna, Alpharetta, Canton, Cartersville, Dallas, Mableton, Milton, and Sandy Springs.

Call (678) 632-2678 or contact Ampt Electric today to schedule your outdoor outlet installation before the holiday rush.


October 2, 2026
Why a Generac Whole-Home Generator Is Important Before Winter in Atlanta
At Home Charger
October 2, 2026
Considering an EV charger in Kennesaw, Acworth, Marietta, or North Cobb County? Learn why home charging makes sense and what homeowners should know before installation.
Outlets
June 17, 2026
What does a whole-home surge protector do? Learn how it blocks voltage spikes to help protect appliances, electronics, and your electrical system.
By Charles Wilson • January 6, 2025
At Ampt Electric, we believe that every home and business deserves reliable, efficient, and safe electrical solutions.
By Charles Wilson • December 26, 2024
The holidays are over, and it’s time to spark fresh energy as we return to work.
December 17, 2024
Spreading Holiday Cheer and Brightening Your Home The Christmas season is here.
By Charles Wilson • July 9, 2024
Stay Cool and Save: Top Tips for Energy Efficiency This Summer**
An ampt. electric vehicle in front of a Tesla Dealer
By Charles Wilson • June 13, 2024
Get Tesla charger installation from Amp’t Electric. Learn what to expect, home charging benefits, and how licensed electricians install EV chargers.
By Charles Wilson • November 7, 2023
As winter's icy grip tightens, the need for effective home heating becomes paramount.
Dining Room Table
September 25, 2023
Find out how LED lights work, why they use less energy, and how they improve brightness, lifespan, and efficiency throughout your home.